NV-700I Managed Industrial VDSL2 CO/CPE Modem USER’S MANUAL Ver. A.5
51
4.5.2.1 VDSL Config Overview
Below table clarify the settings of 9 different VDSL modes.
NO
.
Config.
Note
1
Sy-Auto I_8/2 (SNRM 8/8)
Symmetric Auto, enable Max. Interleave=8, Min.Inp=2, enable,
SNRM=8
2
NSy-Auto I_8/2 (SNRM 8/8)
non symmetric Auto, enable Max. Interleave=8, Min.Inp=2,
enable, SNRM=8
3
Sy-Auto I_8/2 (SNRM 6/6)
Symmetric Auto, Max. Interleave=8, Min.Inp=2,
SNRM=6 (Default)
4
NSy-Auto I_8/2 (SNRM 6/6)
Non symmetric Auto, Max. Interleave=8, Min.Inp=2,
SNRM=6
5
Sy-Auto G.INP_17/2/41 (SNRM 12/12)
Symmetric Auto, enable G.INP, enable re-transmition,
SNRM=12
6
NSy-Auto G.INP_17/2/41 (SNRM 12/12)
non symmetric Auto, enable G.INP, enable re-transmition,
SNRM=12
7
Sy-30a-D2.2M G.INP_17/2/41 (Rate 20/20) (SNRM 24/24)
Symmetric 30a, disable 0~2.2MHz, enable G.INP, enable
re-transmition, Max.Line rate=20Mbps, SNRM=24
8
Annex-A-17a-eu32_I-8/2 (SNRM 6/6)
17A Annex A Eu32, Max. Interleave=8, Min. Inp=2,
SNRM=6
9
Slave(CPE) Mode select
Config Slave mode, default is Master(CO) mode
Note
：
：
：
：
This device is available to select Master (Config 1~8) / Slave (Config 9) mode through web config.
