7
2.2 Enclosure Setup
1. Remove the NS388S enclosure from its packaging, and place the
enclosure next to PC, server, or workstation.
2. Hold one of the drive trays from the enclosure and push its button
downward for the release of the lever until the lever pops out.
3. Place a drive tray on a flat and level surface, and then attach the drive
into the tray.
※
You must verify the heads of the four screws are
level with the drive tray while the drive is
attached to the tray; otherwise, a screw may take
hold of the tray from the bottom side and prevent
you to pull the tray out of the enclosure.
