Netronix W121C User Manual Download Page 8

Page: 8 / 87

IEEE802.11n Wireless 1T1R USB Adapter

- 8 -

1.3 Features

High Speed transfer data rate up to 150 Mbps.

Supports 2.4GHz Frequency band, 1T1R.

Supports QoS Enhancement (WMM, WMM-PS Client mode).

Supports Multiple BSSID.

Supports frame aggregation, Power saving mechanism and co-existence.

Transmit Opportunity (TXOP) Short Inter-Frame Space (SIFS) bursting for higher multimedia

bandwidth.

Supports driver for Windows 7, XP 86, XP 64, Vista 86, Vista 64 and Linux.

Supports auto-installation and diagnostic utilities.

1.4 LED Status

This USB Adapter contains one LED. Please refer to the following description for LED definition.

LED Indications Status

Working Status

Blink blue

The Adapter is Radio on

Blink blue and flashing intermittently

The Adapter is already connected but

is not transmitting or receiving data

Blink blue and fast flashing

The Adapter is activity and transmitting

of receiving data.

Radio/ACT LED

Off

The Adapter is Radio off

Summary of Contents for W121C
























































































Search results

Summary of Contents for W121C

Reviews:

Related manuals for W121C

Brands by name

Popular brands

Netronix W121C, User Manual

Search results

Summary of Contents for W121C

Reviews:

Related manuals for W121C

Brands by name

Popular brands