manualshive.com logo in svg

NetPing 8/PWR-220 v3/SMS, User Manual

The "NetPing 8/PWR-220 v3/SMS" user manual is available for free download on our website, ensuring easy access to comprehensive instructions and guidelines. This essential manual assists users in efficiently setting up and operating their NetPing device, enabling seamless management of power and SMS functionalities.

Share
Download
background image

1. 

 

[Docs] NetPing 8/PWR-220 v3/SMS  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  3

1.1 

 

[ENG] Netping 8/PWR-220 v3/SMS, User guide  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  4

1.1.1 

 

[8PWR] Copyright and Disclaimer  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  5

1.1.2 

 

[8PWR] Introduction  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  6

1.1.3 

 

[8PWR] Device Overview  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  7

1.1.4 

 

[8PWR] Sockets and Indication Elements  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  8

1.1.5 

 

[8PWR] Power Supply Channels Management  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  12

1.1.6 

 

[8PWR] Sensors Plugin  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  13

1.1.7 

 

[8PWR] Setting Parameters to Default Values (to the Factory Settings)  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  16

1.1.8 

 

[8PWR] Using IO Lines for External Devices Management (in an Output Mode)  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  17

1.1.9 

 

[8PWR] Shipping Kit  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  18

1.1.10 

 

[8PWR] Operating and Storage Conditions  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  19

1.1.11 

 

[8PWR] Warranty  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  20

1.2 

 

[ENG] NetPing 8/PWR-220 v3/SMS, Firmware description  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  21

1.2.1 

 

[ENG] 1. [DKSF 48.4 IU] Introduction  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  22

1.2.2 

 

[ENG] 2. [DKSF 48.4 IU] Receiving a Main Information about a Device  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  23

1.2.2.1 

 

[ENG] 2.1. [DKSF 48.4 IU] Default Username and Password  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  24

1.2.2.2 

 

[ENG] 2.2. [DKSF 48.4 IU] How to Know a Default IP Address and MAC Address of a Device?  . . . . . . . . . . . .  25

1.2.2.3 

 

[ENG] 2.3. [DKSF 48.4 IU] Connecting a Device with a Default Authorization to a Web Interface  . . . . . . . . . . .  26

1.2.2.4 [ENG] 2.4. [DKSF 48.4 IU] I Need to Know a Firmware Version, a Hardware Version, a Serial Number, a Model of

 

a Device and Its Uptime  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  27
1.2.2.5 

 

[ENG] 2.5. [DKSF 48.4 IU] Where Can I See a Name, a Location and Contacts of a Device?  . . . . . . . . . . . . . . . .  28

1.2.2.6 

 

[ENG] 2.6. [DKSF 48.4 IU] How to Reboot a Device?  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  29

1.2.3 

 

[ENG] 3. [DKSF 48.4 IU] Basic Configuration  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  30

1.2.3.1 

 

[ENG] 3.1. [DKSF 48.4 IU] How to Configure Name of a Device, Its Location and Contacts?  . . . . . . . . . . . . . . .  31

1.2.3.2 

 

[ENG] 3.2. [DKSF 48.4 IU] Where to Change Settings of a Network Interface?  . . . . . . . . . . . . . . . . . . . . . . . . . . .  32

1.2.3.3 

 

[ENG] 3.3. [DKSF 48.4 IU] Changing a Username and a Password  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  33

1.2.3.4 

 

[ENG] 3.4. [DKSF 48.4 IU] How to Set Community for SNMP?  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  34

1.2.3.5 

 

[ENG] 3.5. [DKSF 48.4 IU] How to Restrict Access to a Device?  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  35

1.2.3.6 

 

[ENG] 3.6. [DKSF 48.4 IU] How to Disable All Notifications Quickly?  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  36

1.2.3.7 

 

[ENG] 3.7. [DKSF 48.4 IU] It Is Necessary to Send SNMP Trap Notifications. How to Configure This?  . . . . . . .  37

1.2.3.8 

 

[ENG] 3.8. [DKSF 48.4 IU] How to Set the Clock?  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  38

1.2.3.9 

 

[ENG] 3.9. [DKSF 48.4 IU] I Want to Configure SYSLOG. How to Do This?  . . . . . . . . . . . . . . . . . . . . . . . . . . . .  39

1.2.3.10 

 

[ENG] 3.10. [DKSF 48.4 IU] How to Receive Notifications and Reports via Email?  . . . . . . . . . . . . . . . . . . . . . .  40

1.2.3.11 

 

[ENG] 3.11. [DKSF 48.4 IU] How to Update Firmware on a Device?  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  41

1.2.3.12 

 

[ENG] 3.12. [DKSF 48.4 IU] What Notifications Has the Log File Got?  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  42

1.2.4 

 

[ENG] 4. [DKSF 48.4 IU] Working with Temperature Sensors  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  46

1.2.4.1 

 

[ENG] 4.1. [DKSF 48.4 IU] What Temperature Sensors a Device Supports?  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  47

1.2.4.2 

 

[ENG] 4.2. [DKSF 48.4 IU] How to Determine a Unique Number of a 1-Wire Sensor?  . . . . . . . . . . . . . . . . . . . . .  48

1.2.4.3 

 

[ENG] 4.3. [DKSF 48.4 IU] Where to Read a Current Temperature?  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  49

1.2.4.4 

 

[ENG] 4.4. [DKSF 48.4 IU] Is It Possible to Set a Description for Temperature Sensors?  . . . . . . . . . . . . . . . . . . .  50

1.2.4.5 

 

[ENG] 4.5. [DKSF 48.4 IU] Configuring Top and Bottom Margin of a Safe Range for a Temperature Sensor  . . .  51

1.2.4.6 [ENG] 4.6. [DKSF 48.4 IU] I Want to Configure Sending Notifications When a Status of a Temperature Sensor Is

 

Changed. How to Do This?  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  52

1.2.5 

 

[ENG] 5. [DKSF 48.4 IU] Working with a Humidity Sensor  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  53

1.2.5.1 

 

[ENG] 5.1. [DKSF 48.4 IU] What Humidity Sensor a Device Supports?  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  54

1.2.5.2 

 

[ENG] 5.2. [DKSF 48.4 IU] How to Determine a Unique Id of a 1-Wire Humidity Sensor?  . . . . . . . . . . . . . . . . . .  55

1.2.5.3 

 

[ENG] 5.3. [DKSF 48.4 IU] Initial Configuration of a Humidity Sensor  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  56

1.2.5.4 [ENG] 5.4. [DKSF 48.4 IU] Browsing Readings and Configuring Parameters of a Humidity Sensor in a Web

 

Interface  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  57
1.2.5.5 [ENG] 5.5. [DKSF 48.4 IU] I Want to Configure Sending Notifications When a Humidity Sensor Status Is Changed.

 

How to Do This?  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  58

1.2.6 

 

[ENG] 6. [DKSF 48.4 IU] Working with Smoke Sensors  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  59

1.2.6.1 

 

[ENG] 6.1. [DKSF 48.4 IU] What Smoke Sensors a Device Supports?  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  60

1.2.6.2 

 

[ENG] 6.2. [DKSF 48.4 IU] How to Determine a Unique Number of a 1-Wire Smoke Sensor?  . . . . . . . . . . . . . . .  61

1.2.6.3 

 

[ENG] 6.3. [DKSF 48.4 IU] Initial Configuring of Smoke Sensors  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  62

1.2.6.4 

 

[ENG] 6.4. [DKSF 48.4 IU] Is It Possible to Set Description for Smoke Sensors?  . . . . . . . . . . . . . . . . . . . . . . . . . .  63

1.2.6.5 

 

[ENG] 6.5. [DKSF 48.4 IU] How to Browse a Current Status of Smoke Sensors?  . . . . . . . . . . . . . . . . . . . . . . . . . .  64

1.2.6.6 

 

[ENG] 6.6. [DKSF 48.4 IU] How to Turn a Power Off and Reset a Smoke Sensor?  . . . . . . . . . . . . . . . . . . . . . . . .  65

1.2.6.7 [ENG] 6.7. [DKSF 48.4 IU] I Want to Configure Sending Notifications When a Sensor Status Is Changed. How to

 

Do This?  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  66

1.2.7 

 

[ENG] 7. [DKSF 48.4 IU] Working with Discrete Input-Output Channels  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  67

1.2.7.1 

 

[ENG] 7.1. [DKSF 48.4 IU] Is It Possible to Set a Description for an Input-Output Line?  . . . . . . . . . . . . . . . . . . .  68

1.2.7.2 

 

[ENG] 7.2. [DKSF 48.4 IU] Configuring Operation Mode of an Input-Output Line  . . . . . . . . . . . . . . . . . . . . . . .  69

1.2.7.3 

 

[ENG] 7.3. [DKSF 48.4 IU] How to Define a Current Logic Level at an Input-Output Line?  . . . . . . . . . . . . . . . .  70

1.2.7.4 

 

[ENG] 7.4. [DKSF 48.4 IU] How to Manage an Input-Output Line in the Output Mode?  . . . . . . . . . . . . . . . . . . .  71

1.2.7.5 [ENG] 7.5. [DKSF 48.4 IU] I Want to Configure Sending Notifications When Changing a Logic Level of an

 

Input-Output Line. How to Do This?  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  72
1.2.7.6 

 

[ENG] 7.6. [DKSF 48.4 IU] For What a Filter for Short Noises Is Necessary in Settings of an Input-Output Line?  .  74

74

1.2.8 

 

[ENG] 8. [DKSF 48.4 IU] Working with Built-In Relays  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  75

1.2.8.1 

 

[ENG] 8.1 [DKSF 48.4 IU] Configuring Relay Management Modes  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  76

Summary of Contents for 8/PWR-220 v3/SMS






















































































































































Reviews:

No comments

Related manuals for 8/PWR-220 v3/SMS

Eaton ePDU G3 Installation, Quick Start preview
ePDU G3
Brand: Eaton Pages: 2
Eaton ePDU G3 Quick Start Manual preview
ePDU G3
Brand: Eaton Pages: 20
Samson POWERBRITE PB9 Specifications preview
POWERBRITE PB9
Brand: Samson Pages: 2
ICT ICT180S-12IRC Instruction Manual preview
ICT180S-12IRC
Brand: ICT Pages: 32
M-system W2DY Instruction Manual preview
W2DY
Brand: M-system Pages: 3
Vertiv VP7811B Manual preview
VP7811B
Brand: Vertiv Pages: 79
Atek 10002iX User Manual preview
10002iX
Brand: Atek Pages: 259
PSC PRESS TRAIN Operation Manual preview
PRESS TRAIN
Brand: PSC Pages: 2
Basler BE1-CDS240 Instruction Manual preview
BE1-CDS240
Brand: Basler Pages: 580
Panamax M8C-PRO Specifications preview
M8C-PRO
Brand: Panamax Pages: 2
Panamax M5400-PM Manual preview
M5400-PM
Brand: Panamax Pages: 12
Westell NPGMT1125 Technical Practice preview
NPGMT1125
Brand: Westell Pages: 9
StarTech.com RKPW081915 Instruction Manual preview
RKPW081915
Brand: StarTech.com Pages: 2
StarTech.com RKPW161915 Instruction Manual preview
RKPW161915
Brand: StarTech.com Pages: 2
StarTech.com PDU08C13EU Instruction Manual preview
PDU08C13EU
Brand: StarTech.com Pages: 2
StarTech.com PDU08C13AU Instruction Manual preview
PDU08C13AU
Brand: StarTech.com Pages: 2
StarTech.com TB31PCIEX16 Manual preview
TB31PCIEX16
Brand: StarTech.com Pages: 14
StarTech.com PDU02IP Instruction Manual preview
PDU02IP
Brand: StarTech.com Pages: 24

Brands by name

Popular brands

Load more brands