6-4 Getting Started Guide
❑
RFC1483
or
RFC1483 Mode:
❑
Bridged 1483 (default) or
❑
Routed 1483
(for Bridged 1483 only)
PPP over Ethernet (PPPoE)
❑
Off (default) or
❑
On
❑
HDLC
Data Circuit
(ATM Operation Mode only)
VPI (0-255):
(default is 0)
VCI (32-65535):
(default is 35)
_______________________
_______________________
Easy Setup Profile Screen
Address Translation
Enabled:
❑
Yes (default) or
❑
No
IP Addressing:
❑
Numbered (default) or
❑
Unnumbered
(for Numbered IP Addressing)
Local WAN IP Address:
_______________________
Local WAN IP Mask:
_______________________
(for Unnumbered IP Addressing)
Remote IP Address:
_______________________
Remote IP Mask:
_______________________
(for Frame Relay DLEs only)
Frame Relay Management
Type:
❑
ANSI (Annex D)
❑
CCITT (Annex A)
❑
LMI
❑
None
(for PPP DLEs only)
PPP Authentication:
❑
None (default),
❑
PAP or
❑
CHAP
(for PAP or CHAP)
User Name (or Host Name):
_______________________
(for PAP or CHAP)
Password (or Secret):
_______________________
IP Easy Setup Screen
Ethernet IP Address:
Ethernet Subnet Mask:
_______________________
_______________________
(192.168.1.1
255.255.255.0
are defaults)
Domain Name:
_______________________
Primar y Domain Name
Ser ver:
_______________________
Secondar y Domain Name
Ser ver:
_______________________
Default IP Gateway:
_______________________
Easy Setup Security Configuration Screen
Write Access Name:
_______________________
Write Access Password:
_______________________
