Easy Setup 6-11
7.
Toggle
IP Address Serving
to On or Off, depending on whether you want the device’s IP address ser ver to
supply dynamic IP addresses to your client workstations. Normally, you would accept the default On so that
workstations on your LAN can have IP addresses assigned dynamically from the router.
8.
The IP address ser ver will provide 100 IP addresses automatically to workstations on your LAN. You only
need to change the
Number of Client IP Addresses
if you have some other IP addressing scheme.
9.
By default, the
1st Client Address
is 192.168.1.100, based on the device’s default IP address of
192.168.1.1. You only need to change this if you have some other IP addressing scheme.
10. Press the Down arrow key until you reach
NEXT SCREEN
. Press Return.
Easy Setup Security Configuration
The Easy Setup Security Configuration screen lets you password-protect your Netopia 4622. Input your
Write
Access Name
and
Write Access Password
with names or numbers totaling up to eleven digits.
If you password protect the console screens, you will be prompted to enter the name and password you have
specified ever y time you log in to the console screens. Do not forget your name and password. If you do, you
will be unable to access any of the configuration screens.
Additional security features are available. See the
Firmware User’s Guide
chapter on “Security”.
The final step in configuring the Easy Setup console screens is to restar t the Netopia 4622, so that the
configuration settings take effect.
1.
Select
RESTART DEVICE
. A prompt asks you to confirm your choice.
2.
Select
CONTINUE
to restar t the Netopia Router and have your selections take effect.
Note:
You can also restar t the system at any time by using the Restar t System utility in the Utilities and
Diagnostics menu, or by turning the Netopia Router off and on with the power switch.
Easy Setup Security Configuration
It is strongly suggested that you password-protect configuration access to your
Netopia. By entering a Name and Password pair here, access via serial,
Telnet, and SNMP will be password-protected.
Be sure to remember what you have typed here, because you will be prompted for
it each time you configure this Netopia.
Write Access Name:
Write Access Password:
PREVIOUS SCREEN TO MAIN MENU RESTART DEVICE
Configure a Configuration Access Name and Password here.
