6-2 Getting Started Guide
Quick Easy Setup Connection Path
This section may be all you need to do to configure your Netopia 3381-ENT Cable/DSL Router. Your ser vice
provider will supply you with several parameter values. Below is a handy checklist:
WAN Ethernet Configuration Screen
Enable PPP over Ethernet
❑
Off (default) or
❑
On
Address Translation
Enabled:
(if PPPoE is not enabled)
❑
Yes (default) or
❑
No
Local WAN IP Address
_______________________
(0.0.0.0 is default)
Local WAN IP Mask:
(if Local WAN IP Address is other
than 0.0.0.0)
_______________________
Easy Setup Profile Screen (only if PPPoE is enabled)
Address Translation
Enabled:
❑
Yes (default) or
❑
No
IP Addressing
❑
Unnumbered (default)
❑
Numbered
Remote IP Address:
_______________________
(127.0.0.2 is default)
Remote IP Mask:
_______________________
(255.255.255.255 is default)
PPP Authentication
❑
PAP (default) or
❑
CHAP
❑
None
PAP User Name/
CHAP Host Name:
_______________________
PAP Password/
CHAP Secret:
_______________________
Local WAN IP Address:
(Numbered IP addressing
only)
_______________________
(0.0.0.0 is default)
Local WAN IP Mask:
(Numbered IP addressing only)
_______________________
IP Easy Setup Screen
Ethernet IP Address:
Ethernet Subnet Mask:
_______________________
_______________________
(192.168.1.1 default)
(255.255.255.0 default)
Domain Name:
_______________________
Primar y Domain Name
Ser ver:
_______________________
Secondar y Domain Name
Ser ver:
_______________________
Default IP Gateway:
_______________________
IP Address Ser ving:
❑
On (default) or
❑
Off
Number of Client IP
Addresses:
_______________________
(100 is default)
1st Client Address:
_______________________
(192.168.1.100 is default)
Easy Setup Security Configuration Screen
Write Access Name:
_______________________
Write Access Password:
_______________________
