3-2 Getting Started Guide
Ethernet:
Ethernet hardware and software drivers enable your PC or Macintosh computer to communicate on
the LAN.
Once the Netopia 3341-ENT is properly configured and connected to your LAN, PC and Macintosh computers
that have their required components in place will be able to connect to the Internet or other remote IP networks.
Connecting to an Ethernet Network
You can connect a standard 10/100Base-T Ethernet network to the Netopia 3341-ENT using its Ethernet por t.
Netopia 3341-ENT back panel
If you add devices connected through a hub or switch, connect the hub or switch to the Ethernet por t on the
Netopia 3341-ENT.
The Netopia 3341-ENT in a 10/100Base-T network
Macintosh
PC
PC
Ethernet
Switch
To connect your 10/100Base-T network to the
Netopia 3341-ENT through the Ethernet por t,
use a standard Categor y 5 Ethernet cable with
RJ-45 connectors.
You can attach additional devices using
standard Categor y 5 Ethernet cables (not
provided) connected to a 10- or 100Base-T
Ethernet hub or switch. The por t on the router
will auto detect 10- or 100Base-T. Crossover
cables are not required.
PC