6-4 Getting Started Guide
1. DSL Line Configuration
1.
Select
Trellis Coding Enabled
. Toggle it to On (the default) or Off. Unless other wise specified by your
provider, you can accept this default.
2.
Select
Fast Retrain Enabled
. Toggle it to On (the default) or Off. Unless other wise specified by your
provider, you can accept this default.
3.
The
Wiring Type
pop-up menu allows you to choose the type of copper pair wiring in use at your location.
Tip/Ring (Inner Pair) is the most common type, and you can usually leave this default. If there is a problem
connecting, you can select AutoSense and the Router will attempt to detect the type and adjust itself
accordingly. If you want to set it yourself, and you know that you have the reversed inner/outer pair type of
wiring, choose A/A1 (Outer Pair) from the pop-up menu.
4.
Select
Data Link Encapsulation
and from the pop-up menu choose either RFC1483 (the default) or PPP.
•
If you selected RFC1483, the next pop-up menu
RFC1483 Mode
offers the choice of Bridged 1483 or
Routed 1483. If you select Bridged 1483, a new option
PPP over Ethernet (PPPoE)
appears. You can
then toggle PPPoE
On
or
Off
. Choosing Routed 1483 hides the PPPoE option.
•
If you selected PPP, the next pop-up menu
PPP Mode
offers the choice of VC Multiplexed or LLC SNAP.
5.
The next two fields,
Data Circuit VPI
and
Data Circuit VCI
are editable. Enter the Vir tual Path Identifier and
Vir tual Channel Identifier values that your provider specifies. VPI 8/VCI 35 are the most common. Your
provider must specify these values.
6.
Press the Down arrow key until you reach
NEXT SCREEN
. Press Return to bring up the next screen.
ADSL Line Configuration
Trellis Coding Enabled: On
Fast Retrain Enabled: On
Wiring Type... Tip/Ring (Inner Pair)
Data Link Encapsulation... RFC1483
RFC1483 Mode... Bridged 1483
PPP over Ethernet (PPPoE): Off
Data Circuit VPI (0-255): 8
Data Circuit VCI (32-65535): 35
PREVIOUS SCREEN NEXT SCREEN
