background image

 

2-2  Getting Started Guide

 

 

The Netopia CD containing software and documentation

You will need:

 

 

A Windows–based PC or a Macintosh computer with Ethernet connectivity for configuring the Netopia 
3341-ENT. This may be built-in Ethernet or an add-on card, with TCP/IP installed and configured. See 

“Sharing the Connection” on page 4-1

.

 

 

A DSL wall outlet wired for a connection to a telephone carrier who suppor ts Asymmetric Digital Subscriber 
Line (ADSL) connections.

Important Safety Instructions

CAUTION: 

Depending on the power supply provided with the product, either the direct plug-in power supply 

blades, power supply cord plug or the appliance coupler ser ves as the main power disconnect. It is 
impor tant that the direct plug-in power supply, socket-outlet or appliance coupler be located so it is readily 
accessible.

CAUTION (North America Only): 

For use only with a CSA Cer tified or UL Listed Limited Power Source or 

Class 2 power supply, rated 12Vdc, 1.5A.

CAUTION (Europe Only): 

For use only with a GS approved Limited Power Source, rated 12Vdc, 1.5A.

TELECOMMUNICATION INSTALLATION CAUTIONS

When using your telephone equipment, basic safety precautions should always be followed to reduce the 
risk of fire, electric shock and injur y to persons, including the following:

1.

Do not use this product near water, for example, near a bathtub, wash bowl, kitchen sink or laundr y 
tub, in a wet basement or near a swimming pool.

2.

Avoid using a telephone (other than a cordless type) during an electrical storm. There may be a remote 
risk of electrical shock from lightning.

3.

Do not use the telephone to repor t a gas leak in the vicinity of the leak.

SAVE THESE INSTRUCTIONS

Summary of Contents for 3341-ENT









































Reviews: