11
3.4
LED and button functions
LED indicators
OUTPUTS (green)
Light when at least one Output is ON. Blink when Output state change.
INPUTS (green)
Blink when some Input state change
M2M (red)
Blink when some M2M communication is in progress.
Communication with NETIO Cloud included (if Cloud enabled).
(communication of WEB administration or Mobile app is not indicated)
WiFi (yellow)
Light when connected to WiFi
RJ45 LEDs (green and yellow)
Ethernet Link and Activity
SETUP button (under the top plate)
Remove the top plate with green label – the button “DEFAULT” is on the left side.
Restoring factory defaults
Disconnect the device from the power. Press and hold the button.
Connect the device to the power grid (button is pushed) and wait at
least 10 seconds. After green LED OUTPUTS blinks, release the button.
The device reverts to factory settings and the AP mode is activated (if no
Ethernet cable connected).
3.5
Minimum system requirements (for configuration)
A device with an Internet browser (Firefox, Chrome, Safari, Microsoft Internet Explorer, Opera, Mozilla
etc.) that has JavaScript and cookies enabled.