N600 Wireless Dual Band Router WNDR3400 User Manual
Default Configuration and Technical Specifications
A-2
v1.0, August 2010
Internet connection
MAC Address
Use default hardware address
MTU Size
1500
Local network
Router LAN IP address printed on
product label (gateway IP address)
192.168.1.1
Router subnet
255.255.255.0
DHCP server
Enabled
DHCP range
192.168.1.2 to 192.168.1.254
Time zone
Pacific time
Time zone Daylight Saving time
Disabled
Allow a registrar to configure this router Enabled
Wireless
Wireless communication
Enabled
SSID names
• 2.4GHz b/g/n:
NETGEAR
• 5GHz a/n:
NETGEAR-5G
Security
Disabled
Broadcast SSID
Enabled
Transmission speed
Auto
a
Country/region
United States in the US; otherwise varies by region
RF channel
6 until region selected
Operating mode
Up to 300 Mbps for 5GHz and
up to 145 Mbps for 2.4GHz
b
Data rate
Best
Output power
Full
Firewall
Inbound (communications coming in
from the Internet)
Disabled (bars all unsolicited requests)
Outbound (communications going out
to the Internet)
Enabled (all)
a. Maximum wireless signal rate derived from IEEE Standard 802.11 specifications. Actual throughput will vary. Network
conditions and environmental factors, including volume of network traffic, building materials and construction, and
network overhead, lower actual data throughput rate.
b. Configurable to 300 Mbps at 2.4GHz.
Table A-1. WNDR3400 Router Default Configuration Settings (continued)
Feature
Default Setting
