Advanced Configuration
36
WN804 Access Point
4.
Select the
Wireless Base Station
radio button.
5.
(Optional) Select the
Disable Wireless Client Association
check box to prevent wireless
clients from associating with the base station and allowing LAN client associations only.
You can leave the check box cleared if you prefer wireless clients to be able to associate
with the base stations.
6.
In the Repeater MAC Address 1 through 4 fields, enter the MAC addresses for the access
points that should function as repeaters.
If your access point is the base station, it can function as the “parent” for up to four other
access points.
7.
Click the
Apply
button.
Your changes are saved.
Set Up a Repeater
Use a wired Ethernet connection to set up the repeater unit to avoid conflicts with the wireless
connection to the base station.
Note:
If you are using the access point as the base station with a
non-NETGEAR access point as the repeater, you might need to
change more configuration settings. In particular, you should disable
the DHCP server function on the access point that is the repeater.
To configure the access point as a repeater:
1.
For the access point that will be the repeater, verify that the wireless settings match the
base unit exactly.
The wireless security option has to be set to
WEP
or
None
.
