System Requirements for the Bridge
To use the bridge in your network you must have:
•
Wireless router or access point (infrastructure mode) or a network of wireless
devices (ad hoc mode)
•
Network software (Windows, Mac OS, Linux, or UNIX)
•
Internet Explorer 5.0 or later; Netscape Navigator 4.7 or later
Bridge Specifications
[MOST NEED TO BE UPDATED]
Dimensions:
W: 108.2 mm (4.26") D: 62.31 mm (2.45") H: 27.51 mm (1.08")
Weight:
0.099 kg (0.219 lbs.)
LAN:
10BASE-T
WLAN:
802.11g or 802.11b
Power Adapter:
5V AC, 2A with localized plug for North America, UK, Europe
or Australia
Environmental Specifications
[ACCURATE???]
Operating temperature:
–10 to 55°C (14˚ to 131˚F)
Operating humidity:
85% maximum relative humidity, noncondensing
Electromagnetic
Emissions:
CE/LVD: EN 60950:1992+A1+A2+A3+A4+A11
CE/EMC: EN 301489-17 V1.1.1: 09-2000
EN 301489-1 V1.3.1: 09-2001
CE/Radio: EN 300328-1 V1.3.1: 12-2001
EN 300328-2 V1.2.1: 12-2001
FCC Part 15 Subpart C
FCC Part 15 Subpart B
Safety Certifications:
UL 1950, C UL Marks, TUV (EN 60950)
Note:
For more troubleshooting information, go to the NETGEAR, Inc. web site.
Solution
•
If the wireless LAN setting are
correct, make sure all the devices
are on the same IP network.
•
Make sure the RJ-45 connectors
are plugged into the computer and
bridge securely.
•
You may need to change the IP
address of your computer
temporarily. See page xx.
•
Reset to factory defaults. See pg.xx.
Symptom
I can’t get the
configuration
software for the
bridge to show using
my browser.
Cause
This could be a network
configuration problem or
a hardware connection
problem.
08-2002
08-2002
W: 174mm (6.85") D: 116.5mm (4.59") H: 26mm (1.02")
0.261kg (0.5741 lbs.)
10/100 BASE-T
802.11g or802.11b
12V DC 1.2A
Summary of Contents for WGE101
Page 1: ......
