Reserved LAN IP addresses [router mode]
If the AP is in router mode, you can specify a reserved IP address for a device on the
LAN subnet. Each time such a device accesses the AP’s DHCP server, the device receives
the same IP address.
Note: The information in the following sections is not required if the AP is operating
in AP mode. In AP mode, reserved LAN IP addresses can be provided by the routing
device to which the AP connects. Therefore, in AP mode, the reserved LAN IP address
settings are masked out in the local browser UI.
Reserve a LAN IP address [router mode]
You can assign a reserved IP address for a device such as a computer or server that
requires permanent IP settings.
To reserve an IP address:
1. Launch a web browser from a computer or mobile device that is connected to a WiFi
network or LAN port on the AP.
2. Enter http://www.routerlogin.net in the address field.
A login window displays.
If your browser displays a security warning, dismiss the warning. For more information,
see Dismiss a browser security warning on page 39.
3. Enter the AP local device password.
The local device password is the one that you specified. The local device password
is case-sensitive.
The BASIC Home page displays.
4. Select ADVANCED > Setup > LAN Setup.
The LAN Setup page displays.
5. Below the Address Reservation table, click the Add button.
The Address Reservation page displays.
6. Either select the radio button for an attached device that displays in the table or
specify the reserved IP address settings in the following fields:
• IP Address: Enter the IP address to assign to the computer or device.
Enter an IP address in the AP’s LAN subnet, such as 192.168.1.x.
• MAC Address: Enter the MAC address of the computer or device.
• Device Name: Enter the name of the computer or device.
User Manual
81
Network Settings
WiFi 6 AX1800/AX3200 Dual Band Wireless Access Points, WAX202 and WAX206
