(Continued)
Description
Field
The WAN IP address that the AP receives from your ISP (through your modem) or
the WAN IP address that you manually configured.
IP Address
The type of Internet connection that the AP uses, which can be DHCP (the default
setting), Static IP, or PPPoE.
Connection
The IP subnet mask that the AP uses.
IP Subnet Mask
The IP address of the Domain Name System (DNS) server that the AP uses.
Domain Name Server
This field shows
Internet Port
and the speed of the connection.
WAN Preference
Description
Field
Wireless Settings (2.4 GHz) or Wireless Settings (5.0 GHz )
To change these settings, see Basic WiFi and Radio Features on page 48 and Advanced WiFi and Radio Features
on page 117.
The name of the SSID (see Set up or change an open or secure WiFi network on
page 49).
Name
The country and region in which the AP is being used (see Change the region of
operation on page 118).
Region
The channel that the radio uses (see Change the channel for a radio on page 123).
Channel
The WiFi throughput mode that the radio uses (see Change the WiFi throughput
mode on model WAX202 on page 124).
Mode
Displays if the WiFi network is enabled (see Set up or change an open or secure
WiFi network on page 49 or Enable or disable a WiFi network on page 55).
Wireless AP
Displays if the WiFi network broadcasts its SSID (see Broadcast or hide the SSID
for a WiFi network on page 56).
Broadcast Name
Display information about the LAN port, AP, and WiFi
settings [AP mode]
If the AP is operating in AP mode, you can display information about the LAN IP
addresses, AP, and the WiFi settings for each radio.
User Manual
105
Maintain and Monitor
WiFi 6 AX1800/AX3200 Dual Band Wireless Access Points, WAX202 and WAX206
