ProSafe Dual Band Wireless Access Point WAG102 Reference Manual (802.11a/g)
2-34
Basic Installation and Configuration
v2.0, September 2006
4.
Select Security Profile Settings under Security on the main menu, When the screen displays,
check the radio button of the security profile you are modifying and click
Edit
.
5.
From the
Network Authentication
drop-down menu, select
WPA & WPA2 with RADIUS
from the list. By default,
Data Encryption
will be set to
TKIP+AES
.
6. Wireless Client Security Separation
is disabled by default. If enabled, associated wireless
clients will not be able to communicate with each other. (This feature is intended for hotspots
and other public access situations.
7.
Click
Apply
to save your settings.
Configuring WPA-PSK
Not all wireless adapters support WPA. Furthermore, client software is required on the client.
Windows XP and Windows 2000 with Service Pack 3 or above include the client software that
supports WPA. Nevertheless, the wireless adapter hardware and driver must also support WPA.
Consult the product document for your wireless adapter and WPA client software for instructions
on configuring WPA settings.
Figure 2-19
