ProSafe Dual Band Wireless Access Point WAG102 Reference Manual (802.11a/g)
2-16
Basic Installation and Configuration
v2.0, September 2006
Configuring 802.11b/g Wireless Settings
To configure the wireless settings of your 802.11 b/g wireless access point:
1.
From main menu under Setup, select Wireless Settings 11b/g. The Wireless Settings 11b/g
screen will display as shown in
Figure 2-10
below.
2.
Configure the Wireless LAN settings based on the following field descriptions:
•
Turn Radio On
. On by default, you can also turn off the radio to disable access through
this device. This can be helpful for configuration, network tuning, or troubleshooting
activities.
•
Wireless Mode
. From the pull-down menu, select the desired wireless operating mode.
The options are:
–
Auto (11g/11b) – Both 802.11g and 802.11b wireless stations can be supported. This
is the default.
–
11g Only – Only 802.11g wireless stations can be used.
–
11b Only – All 802.11b wireless stations can be used. (The 802.11g wireless stations
can still be used if they can operate in 802.11b mode.)
•
Channel/Frequency
. From the pull-down menu, select the channel you wish to use on
your wireless LAN. The wireless channel in use will be between 1 to 11 for US and
Canada, 1 to 13 for Europe and Australia. The default is channel 11.
Figure 2-10
