background image

Disks and Disk Replacements

29

 ReadyNAS Desktop Storage Systems

Supported Disks

Use only supported disks in your ReadyNAS storage system. If you use non-supported disks, 
NETGEARTechnical Support will not provide assistance. For a list of supported disks, see 
theNETGEAR Hardware Compatibility List at 

http://www.readynas.com/?page_id=82

For information about installing and configuring disks on the ReadyNAS Ultra series or the 
ReadyNAS Ultra Plus series, see the 

ReadyNAS for Home Software Manual

. For information 

about installing and configuring disks on the ReadyNAS Pro series, see the 

ReadyNAS for 

Business Software Manual

. Both documents are available at  

http://www.readynas.com/?cat=40

Failed Disk Notification

When a disk fails in your ReadyNAS, you are notified by email. Email alerts must be set up 
for notifications to be sent. In addition, FrontView provides information about the failed disk. 

NETGEAR recommends replacing a failed disk with the same disk model. 

Use FrontView to determine the disk vendor and model used in your unit. 

For information about setting up email alerts and using FrontView for the ReadyNAS Ultra 
series or the ReadyNAS Ultra Plus series, see the 

ReadyNAS for Home Software Manual

For information about setting up email alerts and using FrontView for the ReadyNAS Pro 
series, see the 

ReadyNAS for Business Software Manual

.Both documents are available at 

http://www.readynas.com/?cat=40

.

WARNING!

No matter how many hard drives are installed in your unit, ensure 
that all drive trays remain in the drive bays to maintain adequate 
airflow.

Summary of Contents for ReadyNAS Ultra 2













































Reviews: