NETGEAR ReadyNAS Ultra 2 Page 35 Hardware Manual Download

Page: 35 / 44

Defaults and Technical Specifications

ReadyNAS Desktop Storage Systems

ReadyNAS Ultra 4, Ultra 4 Plus, Pro 4

The following table lists factory default settings for ReadyNAS Ultra 4, Ultra 4 Plus, and Pro 4
storage systems.

Feature

Default

User login URL when the ReadyNAS is
not connected to a DHCP server

https://192.168.168.168

Admin user name (case-sensitive)

admin

Admin login password (case-sensitive)

netgear1

Management

System configuration

FrontView Web-based configuration and status
monitoring

Discovery, multi-unit status monitoring,
and RAID formatting utility

RAIDar for Windows, Mac, and Linux

LAN Connections

MAC address

Default address

MTU size

1500

Ports

2 Auto Sense 10/100/1000BASE-T, RJ-45

LAN IP address

DHCP acquired

ReadyNAS Ultra 4, Ultra 4 Plus, and Pro 4 storage systems meet the following technical
specifications:

General:

•

4-bay storage

•

Intel single-core processor in Ultra, Intel dual-core processor in Ultra Plus and Pro

•

1 GB DDR2 SODIMM RAM

•

Two gigabit Ethernet ports

•

Three USB 2.0 ports

•

XRAID2, Flex-RAID

•

RAID 0, 1, 5, 10 data protection

Physical dimensions (h x w x d):

•

200 x 132 x 222 mm

•

7.9 x 5.2 x 8.7 in

Summary of Contents for ReadyNAS Ultra 2













































Search results

Summary of Contents for ReadyNAS Ultra 2

Reviews:

Related manuals for ReadyNAS Ultra 2

Brands by name

Popular brands

NETGEAR ReadyNAS Ultra 2, Hardware Manual

Search results

Summary of Contents for ReadyNAS Ultra 2

Reviews:

Related manuals for ReadyNAS Ultra 2

Brands by name

Popular brands