Reference Manual for the RangeMax Wireless Router WPN824
Maintenance
6-5
v1.0, November 2005
Viewing a List of Attached Devices
The Attached Devices menu contains a table of all IP devices that the router has discovered on the
local network. From the main menu of the browser interface, under the Maintenance heading,
select
Attached Devices
to view the table as shown below.
For each device, the table shows the IP address, Device Name (if available), and Ethernet MAC
address. To force the router to look for attached devices, click the
Refresh
button.
TxPkts
The number of packets transmitted on this port since reset or manual clear.
RxPkts
The number of packets received on this port since reset or manual clear.
Collisions
The number of collisions on this port since reset or manual clear.
Tx B/s
The current transmission (outbound) bandwidth used on the WAN and LAN ports.
Rx B/s
The current reception (inbound) bandwidth used on the WAN and LAN ports.
Up Time
The time elapsed since this port acquired the link.
Poll Interval
Specifies the intervals at which the statistics are updated in this window. Click on
Stop
to freeze the display.
Set Interval
Enter a time and click the
Set Interval
button to set the polling frequency.
Stop
Click the
Stop
button to freeze the polling information.
Figure 6-4
Note:
If the router is rebooted, the table data is lost until the router rediscovers the
devices.
Table 6-3:
Router Statistics Items (continued)
Item
Description
