Reference Manual for the RangeMax Wireless Router WPN824
Introduction
2-7
v1.0, November 2005
The Router’s Front Panel
The front panel of the WPN824 router contains the status lights described below.
You can use the status lights to verify connections. Viewed from left to right, the table below
describes the lights on the front panel of the router.
Figure 2-1
Table 2-1. Status Light Descriptions
Item
Function
Activity
Description
1
Power
On Green Solid
Off
Power is supplied to the router.
Power is not supplied to the router.
2
Test On
Off
Slow blinking
The unit is performing the power-on self-test diagnostic.
The unit successfully completed the power-on self-test diagnostic.
Reset button is being pushed, restoring the factory default settings.
3
Wireless
On
Off
Blink
The wireless interface is enabled.
The wireless interface is turned off.
Data is being communicated over the wireless network.
4
Internet Amber
off
Amber on
Amber blinking
Green off
On
Blink
No Ethernet cable is connected to the modem.
Ethernet cable connection to modem is good.
Packets are being transmitted and received from a modem or other
network device, but no IP address has been received.
No IP address received.
IP address received.
IP address received and data is being transmitted and received.
5
LAN
Green
Amber
The LAN port has detected a 100 Mbps link with an attached device.
The LAN port has detected a 10 Mbps link with an attached device.
