NETGEAR RangeMax WPN824 Reference Manual Download Page 20

Page: 20 / 115

Reference Manual for the RangeMax Wireless Router WPN824

2-8

Introduction

v1.0, November 2005

The Router’s Rear Panel

The rear panel of the WPN824 router contains the items listed below.

Viewed from left to right, the rear panel contains the following features:

1. Antenna light LED on/off switch.

2. AC power adapter outlet for

12V DC @ 1A output, 22W maximum

3. Four Local (LAN) 10/100 Mbps Ethernet ports for connecting the router to the local

computers.

4. Internet (WAN) Ethernet port for connecting the router to a cable or DSL modem.

5. Reset push button for restoring the factory default settings. For details, see

“Restoring the

Default Configuration and Password” on page 7-7

Figure 2-2l

Summary of Contents for RangeMax WPN824




















































































































Search results

Summary of Contents for RangeMax WPN824

Reviews:

Related manuals for RangeMax WPN824

Brands by name

Popular brands

NETGEAR RangeMax WPN824, Reference Manual

Search results

Summary of Contents for RangeMax WPN824

Reviews:

Related manuals for RangeMax WPN824

Brands by name

Popular brands