Specify Network Settings
111
AC1750
Smart WiFi Router
To change the LAN TCP/IP settings:
1.
Launch an Internet browser from a computer or wireless device that is connected to the
network.
2.
Type
http://www.routerlogin.net
or
http://www.routerlogin.com
.
A login window opens.
3.
Enter the router user name and password.
The user name is
admin
. The default password is
password
. The user name and
password are case-sensitive.
The BASIC Home page displays.
4.
Select
ADVANCED > Setup > LAN Setup
.
5.
In the
IP Address
field, type the IP address.
6.
In the
IP Subnet Mask
field, type the subnet mask of the router.
The IP address and subnet mask identify which addresses are local to a specific device
and which must be reached through a gateway or router.
7.
Change the RIP settings.
Router Information Protocol (RIP) allows a router to exchange routing information with
other routers.
a.
In the
RIP Direction
menu, select one of the following:
-
Both
. The router broadcasts its routing table periodically and incorporates
information that it receives.
-
Out Only
. The router broadcasts its routing table periodically.
-
In Only
. The router incorporates the RIP information that it receives.
b.
In the
RIP Version
menu, select one of the following:
-
Disabled
. This is the default setting.
