NETGEAR ProSafe FVM318, Reference Manual

Page: 64 / 82

Reference Manual for the Model FVM318 Cable/DSL ProSafe Wireless VPN Security Firewall
Virtual Private Networking 4-9
3.
Configure the VPN Settings of the FVS318 firewall (B) on the remote LAN.
To configure the second FVS318 (B), refer to the configuration worksheet and do the
following:
a.
Log in to the FVS318 router (B) at its default LAN address of http://192.168.0.1 with its
default User Name of
admin and default Password of password , or using whatever User
Name and Password you set up.
b.
From the Setup menu, click the VPN Settings link. The VPN Settings window opens.
c.
Click the button next to an unused profile in the table and click Edit.
The VPN Settings - Main Mode window opens as shown in Figure 4-8 below:
Figure 4-8: LAN B VPN Settings - Main Mode IKE Edit menu
d.
Fill in the Connection Name VPN settings.
• In the Connection Name box, type the same Security Association name of LANs A
and B you entered for LAN A. In this case, enter VPNAB as the Connection Name.
• Enter the unique IPSec Identifiers. In this example, enter LAN_B as the Local IPSec
Identifier name for the local FVS318 (B), and LAN_B as the Remote IPSec Identifier
name for the FVS318 (A).
FVM318.book Page 9 Wednesday, September 18, 2002 5:20 PM