NETGEAR ProSafe FVM318, Reference Manual

Page: 40 / 82

Reference Manual for the Model FVM318 Cable/DSL ProSafe Wireless VPN Security Firewall
Connecting the Firewall to the Internet 2-17
Configuring Wireless Connectivity
Use the procedure below to configure an Internet connection via the serial port of your firewall.
Procedure 2-8: Serial Port Internet Connection Configuration
There are three steps to configuring the serial port of your firewall for an Internet connection:
1.
Connect the firewall to your ISDN or dial-up analog modem
2.
Configure the firewall
3.
Connect to the Internet
Follow the steps below to configure a serial port Internet connection on your firewall.
1.
Connect the Firewall to your ISDN or dial-up modem
a.
Turn off your Modem and connect the cable (C) from your FR328S’s serial port to the
modem.
Figure 2-12: Connect the ISDN or analog modem to the firewall
b.
Turn on the modem and wait about 30 seconds for the lights to stop blinking.
M O DEM
1 2 V DC O . 5 A
8 7 6 5 4 3 2 1
LO CA L
1 0 / 1 0 0 M
IN TER N ET
ISDN or
analog modem
C
FVM318.book Page 17 Wednesday, September 18, 2002 5:20 PM