NETGEAR Nighthawk RS400 User Manual Download Page 65

Page: 65 / 184

To enable or disable Smart Connect:

1. Launch a web browser from a computer or mobile device that is connected to the

router network.

2. Enter http://www.routerlogin.net.

A login window opens.

3. Enter the router admin user name and password.

The user name is admin. The password is the one that you specified the first time
that you logged in. The user name and password are case-sensitive.

The BASIC Home page displays.

4. Select Wireless.

The Wireless Setup page displays.

5. Select or clear the Enable Smart Connect check box.

Selecting this check box turns on Smart Connect and clearing this check box turns
off Smart Connect.

6. Click the Apply button.

Your settings are saved.

User Manual

Optimize Performance

Nighthawk AC2300 Cybersecurity WiFi Router Model RS400

Summary of Contents for Nighthawk RS400

























































































































































































Search results

Summary of Contents for Nighthawk RS400

Reviews:

Related manuals for Nighthawk RS400

Brands by name

Popular brands

NETGEAR Nighthawk RS400, User Manual

Search results

Summary of Contents for Nighthawk RS400

Reviews:

Related manuals for Nighthawk RS400

Brands by name

Popular brands