NETGEAR Nighthawk RS400 User Manual Download Page 146

Page: 146 / 184

Install the OpenVPN client utility and VPN configuration
files on a Mac

To download and install the OpenVPN client utility and the router’s VPN
configuration files on a Mac:

1. Visit code.google.com/p/tunnelblick/, download the OpenVPN client utility for a

Mac, and install it on the Mac.
You might need administrative privileges to install the OpenVPN client utility.

2. Launch a web browser from a computer or mobile device that is connected to the

router network.

3. Enter http://www.routerlogin.net.

A login window opens.

4. Enter the router admin user name and password.

The user name is admin. The password is the one that you specified the first time
that you logged in. The user name and password are case-sensitive.

The BASIC Home page displays.

5. Select ADVANCED > Advanced Setup > VPN Service.

The VPN Service page displays.

6. Make sure that the Enable VPN Service check box is selected.

For more information, see Enable and configure OpenVPN on the router on page
143.

7. In the OpenVPN configuration package download section, click the For MacOSX

button, and download the router’s VPN configuration files.

8. Unzip the configuration files and copy them to the folder in which the OpenVPN

client utility is installed.
The Mac is now ready to for you to set up a VPN connection to the router.

For more information about using OpenVPN on a Mac computer, visit
openvpn.net/index.php/access-server/docs/admin-guides/183-how-to-connect-to-access-server-from-a-mac.html.

User Manual

146

Use VPN to Access Your Network

Nighthawk AC2300 Cybersecurity WiFi Router Model RS400

Summary of Contents for Nighthawk RS400

























































































































































































Search results

Summary of Contents for Nighthawk RS400

Reviews:

Related manuals for Nighthawk RS400

Brands by name

Popular brands

NETGEAR Nighthawk RS400, User Manual

Search results

Summary of Contents for Nighthawk RS400

Reviews:

Related manuals for Nighthawk RS400

Brands by name

Popular brands