NETGEAR Nighthawk R7200 User Manual Download Page 117

Page: 117 / 163

The BASIC Home page displays.

4. Select ADVANCED > USB Storage > ReadySHARE.

The USB Storage (Advanced Settings) page displays.

5. In the Available Network Folders section, select the USB storage device.

6. Click the Edit button.

The Edit Network Folder window opens.

7. Change the settings in the fields as needed.

8. Click the Apply button.

Your settings are saved.

Safely remove a USB storage device

Before you physically disconnect a USB storage device from the router USB port, log
in to the router and take the USB storage device offline.

To remove a USB storage device safely:

1. Launch a web browser from a computer or mobile device that is connected to the

router network.

2. Enter http://www.routerlogin.net.

A login window opens.

3. Enter the router admin user name and password.

The user name is admin. The password is the one that you specified the first time
that you logged in. The user name and password are case-sensitive.

The BASIC Home page displays.

4. Select ADVANCED > USB Storage > ReadySHARE.

The USB Storage (Advanced Settings) page displays.

5. In the Available Network Folders sections, select the USB storage device.

6. Click the Safely Remove USB Device button.

This takes the device offline.

7. Physically disconnect the USB storage device.

User Manual

117

Share USB Storage Devices
Attached to the Router

Nighthawk AC2100 Smart WiFi Router Model R7200

Summary of Contents for Nighthawk R7200




































































































































































Search results

Summary of Contents for Nighthawk R7200

Reviews:

Related manuals for Nighthawk R7200

Brands by name

Popular brands

NETGEAR Nighthawk R7200, User Manual

Search results

Summary of Contents for Nighthawk R7200

Reviews:

Related manuals for Nighthawk R7200

Brands by name

Popular brands