NETGEAR Nighthawk R7100LG User Manual Download Page 98

Page: 98 / 179

•

Domain Name Server. The IP address of the Domain Name Service server that provides translation
of network names to IP addresses.

•

RSRP. The reference signal received power.

•

RSRQ. The reference signal received quality.

View the Mobile Broadband Settings

If your modem router is connected to a mobile broadband network, you can log in to the modem router and
view the mobile broadband settings, such as the APN, PDP type, and network mode.

To view the mobile broadband status:

Launch a web browser from a computer or mobile device that is connected to the network.

Type http://www.routerlogin.net.

A login window opens.

Enter the modem router user name and password.

The user name is admin. The default password is password. The user name and password are
case-sensitive.

The BASIC Home page displays.

Select the ADVANCED > Setup > Mobile Broadband Settings.

The Mobile Broadband Settings page displays.

View and Manage Logs of Router Activity

The log is a detailed record of the websites you accessed or attempted to access and other router actions.
Up to 256 entries are stored in the log.

To view and manage logs:

Launch a web browser from a computer or mobile device that is connected to the network.

Enter http://www.routerlogin.net in the address field.

A login window opens.

Enter the modem router user name and password.

The user name is admin. The default password is password. The user name and password are
case-sensitive.

The BASIC Home page displays.

Manage Your Network

Nighthawk AC1900 WiFi LTE Modem Router

Summary of Contents for Nighthawk R7100LG




















































































































































































Search results

Summary of Contents for Nighthawk R7100LG

Reviews:

NETGEAR Nighthawk R7100LG, User Manual, Page: 98 / 179

Search results

Summary of Contents for Nighthawk R7100LG

Reviews: