manualshive.com logo in svg

NETGEAR Nighthawk R7100LG, User Manual, Page: 112 / 179

Share
Download
NETGEAR Nighthawk R7100LG User Manual Download Page 112

USB Device Requirements

The modem router works with most USB-compliant external flash and hard drives. For the most up-to-date
list of USB devices that the modem router supports, visit

kb.netgear.com/app/answers/detail/a_id/18985/~/readyshare-usb-drives-compatibility-list

.

Some USB external hard drives and flash drives require you to load the drivers onto the computer before
the computer can access the USB storage device. Such USB storage devices do not work with the modem
router.

The modem router supports the following file system types for full read/write access:

•

FAT16

•

FAT32

•

NTFS

•

NTFS with compression format enabled

•

Ext2

•

Ext3

•

Ext4

•

HFS

•

HFS+

Connect a USB Storage Device to the Modem Router

ReadySHARE lets you access and share USB and eSATA storage devices that are connected to the
appropriate modem router port. (If your USB storage device uses special drivers, it is not compatible.)

Figure 7. USB 3.0 and an eSATA port are located on the sides of the router

Share USB Storage Devices Attached to the Router

112

Nighthawk AC1900 WiFi LTE Modem Router

Summary of Contents for Nighthawk R7100LG




















































































































































































Reviews:

No comments