NETGEAR Nighthawk GS808E User Manual Download Page 76

Page: 76 / 105

The Quality of Service (QoS) page displays.

5. From the menu on the left, select

MULTICAST

The MULTICAST page displays.

6. Enable or disable IGMP snooping by clicking the button in the IGMP Snooping

section.
When IGMP snooping is enabled, the button bar displays green.

7. Click the

APPLY

button.

Your settings are saved.

Enable a VLAN for IGMP Snooping

You can enable IGMP for a VLAN only if you enabled a port-based VLAN mode or an
802.1Q VLAN mode (see Use VLANS for Traffic Segmentation on page 45).

To enable IGMP snooping for a VLAN:

1. Open a web browser from a computer that is connected to the same network as the

switch or to the switch directly through an Ethernet cable.

2. Enter the IP address that is assigned to the switch.

The login page displays.

3. Enter the switch password.

The default password is

password

. The password is case-sensitive.

The HOME page displays.

4. From the menu at the top of the page, select

SWITCHING

The Quality of Service (QoS) page displays.

5. From the menu on the left, select

MULTICAST

The MULTICAST page displays.

6. In the VLAN ID Enabled for IGMP Snooping section, enter a VLAN ID in the field.

If you enabled either a port-based VLAN mode or an 802.1Q VLAN mode, the default
VLAN for IGMP snooping is VLAN 1.

7. Click the

APPLY

button.

Your settings are saved.

User Manual

Manage the Switch in Your
Network

Nighthawk S8000 Gaming & Streaming Advanced 8-Port Gigabit Ethernet Switch (GS808E)

Summary of Contents for Nighthawk GS808E










































































































Search results

Summary of Contents for Nighthawk GS808E

Reviews:

Related manuals for Nighthawk GS808E

Brands by name

Popular brands

NETGEAR Nighthawk GS808E, User Manual

Search results

Summary of Contents for Nighthawk GS808E

Reviews:

Related manuals for Nighthawk GS808E

Brands by name

Popular brands