NETGEAR Nighthawk GS808E User Manual Download Page 70 | Manualshive

Page: 70 / 105

background image

Manage Switch Discovery Protocols

It is important to know the IP address of the switch so that you can access the local
browser interface of the switch. The switch supports Universal Plug and Play (UPnP),
Bonjour, and NETGEAR Switch Discovery Protocol (NSDP), which are protocols that can
discover the switch. A device that functions in the same network as the switch and that
supports one of these protocols can discover the switch and obtain the IP address.

As a security measure, you can disable one or more discovery protocols. However, we
recommend that you leave at least one discovery protocol enabled so that a device can
discover the switch if the switch IP address changes.

Manage Universal Plug and Play

A Windows-based device that supports Universal Plug and Play (UPnP) can discover the
switch in the network so that you can find the switch IP address and log in to the local
browser interface of the switch. UPnP is enabled by default. You can disable UPnP for
security reasons.

To manage UPnP:

1. Open a web browser from a computer that is connected to the same network as the

switch or to the switch directly through an Ethernet cable.

2. Enter the IP address that is assigned to the switch.

The login page displays.

3. Enter the switch password.

The default password is

password

. The password is case-sensitive.

The HOME page displays.

4. From the menu at the top of the page, select

SETTINGS

.

The PRESET MODES page displays.

5. From the menu on the left, select

SWITCH DISCOVERY

.

The SWITCH DISCOVERY page displays.

6. Enable or disable UPnP by clicking the button in the UPnP section.

When UPnP is enabled, the button bar displays green.

7. Click the

APPLY

button.

Your settings are saved.

User Manual

70

Manage the Switch in Your
Network

Nighthawk S8000 Gaming & Streaming Advanced 8-Port Gigabit Ethernet Switch (GS808E)

«
...
68
69
70
71
72
...
»

Summary of Contents for Nighthawk GS808E










































































































Reviews:

No comments

Related manuals for Nighthawk GS808E

Brand: Quick Eagle Networks Pages: 4

Brand: Zonet Pages: 8

Brand: Queclink Pages: 9

Brand: Funkwerk Pages: 2

Brand: FOR-A Pages: 39

SteelCentral NetExpress

Brand: Riverbed Pages: 38

Net2Air Ins-40085-US

Brand: Paxton Pages: 4

Brand: ZyXEL Communications Pages: 215

Brand: Rajant Corporation Pages: 40

Brand: Supermicro Pages: 15

Brand: FiberHome Pages: 2

Brand: Nexxt Pages: 2

Brand: Pro-Nets Technology Corporation Pages: 48

Brand: IEI Technology Pages: 119

Brand: B&B Electronics Pages: 74

EdgeSafe M40G1AC

Brand: Garland Pages: 159

Brand: MTI Pages: 41

Brand: CHINT Pages: 12

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands