3. Enter the switch password.
The default password is
password
. The password is case-sensitive.
The HOME page displays.
4. From the menu at the top of the page, select
SWITCHING
.
The Quality of Service (QoS) page displays.
5. If the selection from the
QoS Mode
menu is
802.1P/DSCP
, do the following to
change the selection to
Port-based
:
a. From the
QoS Mode
menu, select
Port-Based
.
A pop-up warning window opens.
b. Click the
CONTINUE
button.
The pop-up window closes.
Note:
For information about broadcast filtering, see Manage Broadcast Filtering
and Set Port Storm Control Rate Limits on page 38.
6. To set the port priorities, do the following:
a. Click the
PRIORITY
tab.
b. Click the purple
pencil
icon.
The EDIT PRIORITY page displays.
c. For each port for which you want to set the priority, select
Low
,
Medium
,
High
,
or
Critical
from the individual menu for the port.
The default selection is High.
d. Click the
APPLY
button.
Your settings are saved and the EDIT PRIORITY page closes.
7. To set rate limits, do the following:
a. Click the
RATE LIMITS
tab.
b. Click the purple
pencil
icon.
The EDIT RATE LIMITS page displays.
c. For each port for which you want to set rate limits, select the rate in Kbps or Mbps
from the individual
In Limits
and
Out Limits
menus for the port.
The default selection is No Limit.
d. Click the
APPLY
button.
Your settings are saved and the EDIT RATE LIMITS page closes.
User Manual
36
Optimize the Switch
Performance
Nighthawk S8000 Gaming & Streaming Advanced 8-Port Gigabit Ethernet Switch (GS808E)
