NETGEAR Nighthawk C6900 User Manual Download

Page: 9 / 94

Nighthawk AC1900 WiFi Cable Modem Router

Hardware Setup

User Manual

Internet



• Solid

green

. The modem router is online.

• Blinking

green

. The modem router is synchronizing with the cable provider’s cable

modem termination system (CMTS).

• Slow blinking amber and green

. The modem router reached the traffic meter limit.

(For information about the traffic meter, see

Monitor Internet Traffic on page 67

• Off

. The modem router is offline.

2.4 GHz radio



• Green

. The 2.4 GHz radio is on.

• Off

. The 2.4 GHz radio is off.

5 GHz radio



• Green

. The 5 GHz radio is on.

• Off

. The 5 GHz radio is off.

Ethernet



• Green

. A device is connected to an Ethernet port and powered on. Each Ethernet port

has LEDs on the rear panel.

• Off

. No device is connected to an Ethernet port.

WiFi On/Off but-

ton with LED



Pressing this button for two seconds turns the WiFi radios in the modem router on and off. If
this LED is lit, the WiFi radios are on. If this LED is off, the WiFi radios are turned off and
you cannot use WiFi to connect to the modem router.

WPS button with

LED



This button lets you use WPS to join the WiFi network without typing the WiFi password.
The WPS LED blinks during this process and then lights solid.

LED

Description

Summary of Contents for Nighthawk C6900































































































Search results

Summary of Contents for Nighthawk C6900

Reviews:

Related manuals for Nighthawk C6900

Brands by name

Popular brands

NETGEAR Nighthawk C6900, User Manual

Search results

Summary of Contents for Nighthawk C6900

Reviews:

Related manuals for Nighthawk C6900

Brands by name

Popular brands