NETGEAR Nighthawk C6900 User Manual Download

Page: 67 / 94

Nighthawk AC1900 WiFi Cable Modem Router

Manage Your Network

User Manual

•

Select the

Traffic volume control

radio button and then select one of the

following options:

No Limit

. No restriction is applied when the traffic limit is reached.

Download only

. The restriction is applied to incoming traffic only.

Both Directions

. The restriction is applied to both incoming and outgoing traffic.

•

Select the

Connection time control

radio button and enter the allowed hours in the

Monthly limit field.

(Optional) If your ISP charges for extra data volume when you make a new connection,

enter the extra data volume in MB in the Round up data volume for each connection by field.

In the Traffic Counter section, set the traffic counter to begin at a specific time and date.

If you want the traffic counter to start immediately, click the

Restart Counter Now

button.

In the Traffic Control section, specify whether the modem router should issue a warning

message before the monthly limit of Mbytes or hours is reached.

By default, the value is 0 and no warning message is issued. You can select one of the
following to occur when the limit is attained:

•

The Internet LED blinks green or amber.

•

The Internet connection is disconnected and disabled.

10.

Click the

Apply

button.

The Internet Traffic Statistics section helps you to monitor the data traffic.

11.

To update the Traffic Statistics section, click the

Refresh

button.

12.

To display more information about the data traffic on your modem router and to change the

poll interval, click the

Traffic Status

button.

View Devices Currently on the Network

You can view all computers or devices that are currently connected to your network.

To view devices on the network:

Launch an Internet browser from a computer or wireless device that is connected to the

network.

Type

http://www.routerlogin.net

http://www.routerlogin.com

A login window opens.

Enter the user name and password.

The user name is

admin

. The user name and password are case-sensitive.

The BASIC Home page displays.

Summary of Contents for Nighthawk C6900































































































Search results

Summary of Contents for Nighthawk C6900

Reviews:

Related manuals for Nighthawk C6900

Brands by name

Popular brands

NETGEAR Nighthawk C6900, User Manual

Search results

Summary of Contents for Nighthawk C6900

Reviews:

Related manuals for Nighthawk C6900

Brands by name

Popular brands