manualshive.com logo in svg

NETGEAR Nighthawk C6900, User Manual

Share
Download
NETGEAR Nighthawk C6900 User Manual Download Page 60

Nighthawk AC1900 WiFi Cable Modem Router 

Manage Your Network 

User Manual

61

6. 

In the Internet Port pane, click 

the Show Statistics

 button.

The following information displays:

•

System  Up  Time

. The time elapsed since the modem router was last restarted.

•

Port

. The statistics for the WAN (Internet) and LAN (Ethernet) ports. For each port, 

the page displays:

-

Status

. The link status of the port.

-

TxPkts

. The number of packets transmitted on this port since reset or manual 

clear.

-

RxPkts

. The number of packets received on this port since reset or manual clear.

-

Collisions

. The number of collisions on this port since reset or manual clear.

-

Tx  B/s

. The current transmission (outbound) bandwidth used on the WAN and 

LAN ports.

-

Rx  B/s

. The current reception (inbound) bandwidth used on the WAN and LAN 

ports.

-

Up  Time

. The time elapsed since this port acquired the link.

-

Poll Interval

. The interval at which the statistics are updated in this page. 

7. 

To change the polling frequency, enter a time in seconds in the Poll Interval field and click 

the 

Set Interval

 button. 

8. 

To stop the polling entirely, click the 

Stop

 button.

Check the Internet Connection Status

To check the Internet connection status:

1. 

Launch an Internet browser from a computer or wireless device that is connected to the 

network.

2. 

Type 

http://www.routerlogin.net 

or 

http://www.routerlogin.com

.

A login window opens.

3. 

Enter the user name and password.

The user name is 

admin

. The user name and password are case-sensitive.

Summary of Contents for Nighthawk C6900































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands