NETGEAR Nighthawk AXE1000 User Manual Download Page 37

Page: 37 / 169

Set up an IPv6 fixed Internet connection

To set up a fixed IPv6 Internet connection:

1. Launch a web browser from a computer or mobile device that is connected to the

router network.

2. Enter

http://www.routerlogin.net

A login window opens.

3. Enter the router admin user name and password.

The user name is

admin

. The password is the one that you specified the first time

that you logged in. The user name and password are case-sensitive.
The BASIC Home page displays.

4. Select

ADVANCED > Advanced Setup > IPv6

The IPv6 page displays.

5. From the

Internet Connection Type

menu, select

Fixed

The page adjusts.

6. Configure the fixed IPv6 addresses for the WAN connection:

•

IPv6 Address/Prefix Length

. The IPv6 address and prefix length of the router

WAN interface.

•

Default IPv6 Gateway

. The IPv6 address of the default IPv6 gateway for the

router’s WAN interface.

•

Primary DNS Server

. The primary DNS server that resolves IPv6 domain name

records for the router.

•

Secondary DNS Server

. The secondary DNS server that resolves IPv6 domain

name records for the router.

Note:

If you do not specify the DNS servers, the router uses the DNS servers that

are configured for the IPv4 Internet connection on the Internet Setup page. (See
Manually set up the Internet connection on page 26.)

7. Select an IP Address Assignment radio button:

• Use DHCP Server

. This method passes more information to LAN devices but

some IPv6 systems might not support the DHCPv6 client function.

• Auto Config

. This is the default setting.

This setting specifies how the router assigns IPv6 addresses to the devices on your
home network (the LAN).

User Manual

Specify Your Internet Settings

Nighthawk AXE1000/AXE11000 Tri-Band WiFi 6E Router

Summary of Contents for Nighthawk AXE1000










































































































































































Search results

Summary of Contents for Nighthawk AXE1000

Reviews:

Related manuals for Nighthawk AXE1000

Brands by name

Popular brands

NETGEAR Nighthawk AXE1000, User Manual

Search results

Summary of Contents for Nighthawk AXE1000

Reviews:

Related manuals for Nighthawk AXE1000

Brands by name

Popular brands