NETGEAR Nighthawk AXE1000 User Manual Download Page 67

Page: 67 / 169

The user name is

admin

. The password is the one that you specified the first time

that you logged in. The user name and password are case-sensitive.
The BASIC Home page displays.

4. Select

ADVANCED > Setup > LAN Setup

The LAN Setup page displays.

5. Select the radio button next to the reserved address that you want to delete.
6. Click the

Delete

button.

The address is removed.

Use the WPS Wizard for WiFi connections

The WPS Wizard helps you add a WPS-enabled device to your WiFi network without
typing the WiFi password.

To use the WPS Wizard:

1. Launch a web browser from a computer or mobile device that is connected to the

router network.

2. Enter

http://www.routerlogin.net

A login window opens.

3. Enter the router admin user name and password.

The user name is

admin

. The password is the one that you specified the first time

that you logged in. The user name and password are case-sensitive.
The BASIC Home page displays.

4. Select

ADVANCED > WPS Wizard

A note explaining WPS displays.

5. Click the

Next

button.

The WPS page displays.

6. Select the

Push

button radio button.

7. Click the

WPS

button that is displayed on the page.

8. Within two minutes, go to the WPS-enabled device and use its WPS software to

connect to the WiFi network.
The WPS process automatically sets up yourr WPS-enabled device with the network
password when it connects. The router WPS page displays a confirmation message.

User Manual

Manage Network Settings

Nighthawk AXE1000/AXE11000 Tri-Band WiFi 6E Router

Summary of Contents for Nighthawk AXE1000










































































































































































Search results

Summary of Contents for Nighthawk AXE1000

Reviews:

Related manuals for Nighthawk AXE1000

Brands by name

Popular brands

NETGEAR Nighthawk AXE1000, User Manual

Search results

Summary of Contents for Nighthawk AXE1000

Reviews:

Related manuals for Nighthawk AXE1000

Brands by name

Popular brands