Rear panel
The following figure shows the rear panel connectors and buttons.
Figure 3. Rear panel
The rear panel contains the following components:
1.
LED On/Off switch
. Move the
LED On/Off
switch to the Off position to turn off the
router LEDs. The Power LED stays lit even if the
LED On/Off
switch is in the Off
position.
2.
Reset button
. Pressing the
Reset
button resets the router.
If the
Reset
button is pressed for at least 10 seconds and the Power LED blinks white,
the router returns to its factory settings. For information about the factory settings,
see Factory settings on page 167.
3.
USB 3.0 ports 1 and 2
. Use the two USB 3.0 ports to connect USB storage devices
to your router.
4.
Internet port
. One Gigabit Ethernet RJ-45 WAN port to connect your router to an
Internet modem such as a cable modem or DSL modem.
If you do not use the Internet port for your Internet connection (for example, if you
set up a Multi-Gig Internet connection using the Multi-Gig 2.5G/1G Ethernet port
5), you can use the Internet port as an extra LAN port.
User Manual
13
Hardware Setup
Nighthawk AXE1000/AXE11000 Tri-Band WiFi 6E Router
