NETGEAR MBRN3000 User Manual Download Page 57

Page: 57 / 96

Mobile Broadband Wireless-N Router MBRN3000 User Manual

Managing Your Network

4-10

v1.0, October 2009

Log action buttons are described in the following table.

Selecting Which Information to Log

Besides the standard information listed previously, you can choose to log additional information.
Those optional selections are as follows:

•

Attempted access to blocked site

•

Connections to the Web-based interface of the router

•

Router operation (start up, get time, etc.)

•

Known DoS attacks and port scans

Saving Log Files on a Server

You can choose to write the logs to a computer running a syslog program. To activate this feature,
select to the

Broadcast on LAN

radio button or enter the IP address of the server where the syslog

file will be written.

Source IP

The IP address of the initiating device for this log entry.

Source port and
interface

The service port number of the initiating device, and whether it
originated from the LAN or WAN.

Destination

The name or IP address of the destination device or website.

Destination port and
interface

The service port number of the destination device, and whether it is on
the LAN or WAN.

Table 4-5. Log Action Buttons

Field

Description

Refresh

Refresh the log screen.

Clear Log

Clear the log entries.

Send Log

Email the log immediately.

Apply

Apply the current settings.

Cancel

Clear the current settings.

Table 4-4. Security Log Entry Descriptions

Field

Description

Summary of Contents for MBRN3000

































































































Search results

Summary of Contents for MBRN3000

Reviews:

Related manuals for MBRN3000

Brands by name

Popular brands

NETGEAR MBRN3000, User Manual

Search results

Summary of Contents for MBRN3000

Reviews:

Related manuals for MBRN3000

Brands by name

Popular brands