NETGEAR LBR20 User Manual Download Page 65

Page: 65 / 160

5. To enable or disable daisy-chain topology, do one of the following:

•

To enable MU-MIMO, select the Enable MU-MIMO check box.

•

To disable MU-MIMO, clear the Enable MU-MIMO check box.

6. Click the Apply button.

Your settings are saved.

If you connected over WiFi to the network, you are disconnected from the network
and must reconnect.

Enable or disable fast roaming

Fast roaming allows your Orbi devices to direct your client devices to the most optimal
WiFi band quicker.

To enable or disable fast roaming:

1. Launch a web browser from a computer or mobile device that is connected to your

Orbi network.

2. Enter orbilogin.com.

A login window opens.

3. Enter the admin user name and password.

The user name is admin. The password is the one that you specified the first time
that you logged in. The user name and password are case-sensitive.

The BASIC Home page displays.

4. Select ADVANCED > Advanced Setup > Wireless Settings.

The Advanced Wireless Settings page displays.

5. To enable or disable fast roaming, do one of the following:

•

To enable fast roaming, select the Enable Fast Roaming check box.

•

To disable fast roaming, clear the Enable Fast Roaming check box.

6. Click the Apply button.

Your settings are saved.

User Manual

Optimize Performance

4G LTE WiFi Orbi Router Model LBR20

Summary of Contents for LBR20

































































































































































Search results

Summary of Contents for LBR20

Reviews:

Related manuals for LBR20

Brands by name

Popular brands

NETGEAR LBR20, User Manual

Search results

Summary of Contents for LBR20

Reviews:

Related manuals for LBR20

Brands by name

Popular brands