The page that displays depends on whether you accessed the router web interface
before:
•
The first time that you set up the Internet connection for your router, the browser
goes to orbilogin.com, and the Orbi login page displays.
•
If you already set up the Internet connection, enter orbilogin.com in the address
field for your browser to start the installation process.
4. Follow the onscreen instructions.
The router connects to the Internet.
5. If the browser does not display the web page, do the following:
•
Make sure that the computer or mobile device is connected to the router, either
over WiFi or to one of the LAN Ethernet ports.
•
Make sure that the router is receiving power, and that its Power LED is lit.
•
Close and reopen the browser or clear the browser cache.
•
Browse to orbilogin.com
.
•
If the computer is set to a static or fixed IP address (this setting is uncommon),
change it to obtain an IP address automatically from the router.
6. If the router does not connect to the Internet, do the following:
a. Review your settings.
b. Make sure that you selected the correct options and typed everything correctly.
c. Make sure that the nano SIM card is installed correctly.
d. Contact your LTE provider or wired Internet provider to verify that your account
is active and that you are using the correct configuration information.
e. Read Troubleshoot the mobile broadband Internet connection on page 147 or
You cannot access the Internet on page 150.
If problems persist, register your NETGEAR product and contact NETGEAR
technical support.
Log in to the Orbi router web interface
When you log in to the Orbi, the browser displays the router web interface. You can
use the router web interface to change the router or satellite settings.
User Manual
17
Connect to Your Network and
Access the Router
4G LTE WiFi Orbi Router Model LBR20
