USB Storage
59
N600 Wireless Dual Band Router JNDR3000
USB Drive Requirements
The router works with 1.0 and 1.1 (USB Full Speed) and 2.0 (USB High Speed) standards.
The approximate USB bus speeds are shown in the following table. Actual bus speeds can
vary, depending on the CPU speed, memory, speed of the network, and other variables.
Table 3. USB drive speeds
Bus
Speed per Second
USB 1.1
12 Mbits
USB 2.0
480 Mbits
The router should work with most USB-compliant external flash and hard drives. For the most
up-to-date list of USB drives supported by the router, visit:
http://kbserver.netgear.com/readyshare
The router supports both read and write for FAT16, FAT32, NTFS, and Linux file systems
(EXT2 and EXT3).
Note:
Some USB external hard drives and flash drives require drivers to
be loaded into the Windows computer before the Windows computer
can access the USB device. Such USB devices do not work with the
router.
ReadySHARE Access
Once you have set up your router, you can connect any USB storage device and share the
contents with other users on your network.
You can access your USB device in any of the following ways:
•
On Windows 7, Windows 8, Windows XP, Windows Vista, and Windows 2000 systems,
select
Start > Run
, and enter
\\readyshare
in the dialog box. Click the
OK
button.
•
On Windows 7, Windows 8, Windows XP, Windows Vista, and Windows 2000 systems,
open Internet Explorer, or Safari, and enter
\\readyshare
in the address bar.
•
On Mac OS X (version 10.2 or later), enter
smb://readyshare
in the address bar.
•
In My Network Places, enter
\\readyshare
in the address bar.
For more information about ReadySHARE access for USB storage devices, visit:
http://www.netgear.com/readyshare.
