NETGEAR genie ADVANCED Home
49
N600 Wireless Dual Band Router JNDR3000
The following screen displays:
2.
Enter the settings that you want to customize.
These settings are described in the following section,
LAN Setup Screen Settings
.
3.
Click the
Apply
button.
Your changes are saved.
LAN Setup Screen Settings
The following settings are available on the LAN Setup screen.
LAN TCP/IP Setup
•
IP Address
. The LAN IP address of the router.
•
IP Subnet Mask
. The LAN subnet mask of the router. Combined with the IP address, the
IP subnet mask allows a device to know which other addresses are local to it, and which
have to be reached through a gateway or router.
•
RIP Direction
. Router Information Protocol (RIP) allows a router to exchange routing
information with other routers. This setting controls how the router sends and receives
RIP packets. Both is the default setting. With the Both or Out Only setting, the router
broadcasts its routing table periodically. With the Both or In Only setting, the router
incorporates the RIP information that it receives.
•
RIP Version
. Controls the format and the broadcasting method of the RIP packets that
the router sends. It recognizes both formats when receiving. By default, the RIP function
is disabled.
