manualshive.com logo in svg

NETGEAR FS509, Installation Manual

Share
Download
NETGEAR FS509 Installation Manual Download Page 23

 

Installation Guide for the Model FS509 Fast Ethernet Switch

 

Physical Description

2-7

 

 

 

As Figure 2-4 shows, a full-duplex (FDX) toggle switch or an auto-duplex (AUTO) toggle switch 
are assigned to each 10/100 Mbps port on the Model FS509 switch. The communication mode can 
be set to either full-duplex or auto-duplex mode.

 

FDX/Auto Gigabit Toggle Switch

 

The 1000 Mbps gigabit Ethernet port operates only in full-duplex mode and must only be 
connected to other full duplex devices. Setting the switch to Auto enables the port to advertise that 
it is running in full-duplex mode; setting the switch to FDX mode does not enable the port to 
advertise its mode. 

 

Note: 

 

In addition to setting the duplex toggle switches to the correct position, make sure 

that all Fast Ethernet topology rules are followed.

 

Note: 

 

NETGEAR recommends that the FDX/AUTO switch is left in Auto mode, which 

is the factory setting.

Summary of Contents for FS509



















































Reviews:

No comments

Brands by name

Popular brands

Load more brands