NETGEAR DG834v2 - ADSL Modem Router Reference Manual Download Page 117

Page: 117 / 143

Reference Manual for the Model DG834 ADSL Firewall Router

Preparing Your Network

C-3

You must have an Ethernet adapter, the TCP/IP protocol, and Client for Microsoft Networks.

If you need to install a new adapter, follow these steps:

Click the Add button.

Select Adapter, and then click Add.

Select the manufacturer and model of your Ethernet adapter, and then click OK.

If you need TCP/IP:

Click the Add button.

Select Protocol, and then click Add.

Select Microsoft.

Select TCP/IP, and then click OK.

Note:

It is not necessary to remove any other network components shown in the

Network window in order to install the adapter, TCP/IP, or Client for Microsoft
Networks.

Summary of Contents for DG834v2 - ADSL Modem Router
















































































































































Search results

Summary of Contents for DG834v2 - ADSL Modem Router

Reviews:

Related manuals for DG834v2 - ADSL Modem Router

Brands by name

Popular brands

NETGEAR DG834v2 - ADSL Modem Router, Reference Manual

Search results

Summary of Contents for DG834v2 - ADSL Modem Router

Reviews:

Related manuals for DG834v2 - ADSL Modem Router

Brands by name

Popular brands