NETGEAR DG632 - ADSL Modem Router Reference Manual Download Page 89

Page: 89 / 132

Technical Specifications

A-1

Appendix A

Technical Specifications

This appendix provides technical specifications for the DG632 ADSL Modem Router.

Network Protocol and Standards Compatibility

Data and Routing Protocols:

TCP/IP, RIP-1, RIP-2, DHCP, PPP over Ethernet (PPPoE) or
PPP over ATM (PPPoA), RFC 1483 Bridged or Routed
Ethernet, and RFC 1577 Classical IP over ATM

Power Adapter

North America:

120V, 60 Hz, input

United Kingdom, Australia:

240V, 50 Hz, input

Europe:

230V, 50 Hz, input

Japan:

100V, 50/60 Hz, input

All regions (output):

7.5VDC @ 1.0A output, 7.5W maximum

Physical Specifications

Dimensions:

6.9" x 4.7" x 1.1"

175 mm x 119 mm x 28 mm

Weight:

0.7 lbs.

0.3 kg

Environmental Specifications

Operating temperature:

to 40

C (32º to 104º F)

Operating humidity:

90% maximum relative humidity, noncondensing

Electromagnetic Emissions

Meets requirements of:

FCC Part 15 Class B
EN 55 022 (CISPR 22), Class B

Interface Specifications

Summary of Contents for DG632 - ADSL Modem Router





































































































































Search results

Summary of Contents for DG632 - ADSL Modem Router

Reviews:

Brands by name

Popular brands

NETGEAR DG632 - ADSL Modem Router, Reference Manual

Search results

Summary of Contents for DG632 - ADSL Modem Router

Reviews:

Brands by name

Popular brands