NETGEAR DG632 - ADSL Modem Router, Reference Manual

Page: 29 / 132

Reference Manual for the Model DG632 ADSL Modem Router
Connecting the Modem to the Internet 3-7
c.
Connect the Ethernet cable ( C) from your DG632’s LAN port to the Ethernet adapter in
your computer.
Note: To connect the computer using the USB port, please see “Connecting Your
Computer to the DG632 USB Port Option” on page 3-12 .
Figure 3-6: Connecting a computer to the DG632 modem router
Note: The DG632 modem router incorporates Auto Uplink
TM
technology. The Ethernet port
will automatically sense whether the cable plugged into the port should have a 'normal'
connection (for example, connecting to a computer) or an 'uplink' connection (for example,
connecting to a switch or hub). That port will then configure itself to the correct configuration.
This feature also eliminates the need to worry about crossover cables, as Auto Uplink will
accommodate either type of cable to make the right connection.
d.
Connect the power adapter to the modem and plug it in to a power outlet. Verify the
following:
The power light is lit after turning on the modem.
0HONE $3,
,INE
C