manualshive.com logo in svg

NETGEAR DG632 - ADSL Modem Router, Reference Manual

Share
Download
NETGEAR DG632 - ADSL Modem Router Reference Manual Download Page 122

Reference Manual for the Model DG632 ADSL Modem Router

C-16

Preparing Your Network

 

•

The default gateway is 192.168.0.1

4.

Type 

exit

 

Configuring the Macintosh for TCP/IP Networking

Beginning with Macintosh Operating System 7, TCP/IP is already installed on the Macintosh. On 
each networked Macintosh, you need to configure TCP/IP to use DHCP.

MacOS 8.6 or 9.x

1.

From the Apple menu, select Control Panels, then TCP/IP.

The TCP/IP Control Panel opens:

2.

From the “Connect via” box, select your Macintosh’s Ethernet interface.

3.

From the “Configure” box, select Using DHCP Server.

You can leave the DHCP Client ID box empty.

4.

Close the TCP/IP Control Panel.

5.

Repeat this for each Macintosh on your network.

MacOS X

1.

From the Apple menu, choose System Preferences, then Network.

Summary of Contents for DG632 - ADSL Modem Router





































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands